How to install Pendant lights?
1. Unpack your new fixture- Carefully lay out the parts so they are easily accessible. 2. Turn off the power- Find your home’s circuit breaker or fuse box and turn off power to the room or area of the house where you’ ll be installing the light. 3. Remove the old fixture- Unless you are installing your pendant light in a new or recently remodeled house, you will probably need to remove an old light fixture. 4. Check your support- Make sure your installation location is structurally sound. 5. Check the junction box- Make sure the screws holding the electrical box in place are tight and the box is secure. 6. Attach the power wires- Connect wires according to the directions provided with the light. 7. Attach the ground wire- Find the ground wire on the pendant light. Depending on your wiring, you will either wrap it around a ground screw located in the junction box or attach it to a protruding ground wire. 8. Secure the wires- Push or fold the wiring up into the junctio